Here is a a simple yet effective way to create a clean looking ‘lock rebate’ joint, especially useful in making drawers. The picture below shows an example of the finished joint.
Lock rebate joint
The thicker piece of wood in this picture is the drawer front while the thinner piece is the drawer side. The advantage of this type of joint in this particular application, i.e. drawer joinery is that is relatively easy (using a router table or table saw) and provide a aesthetically pleasing joint that is also as strong as a half-blind dovetail joint. Read more
I try to use traditional woodworking joinery in my furniture as much as possible. My favourite joint has to be the “dovetail” joint. Below are two examples of this type of joint. The first picture below is hand-cut and known as a half-blind dovetail joint because it can only be see from one side whilst the second picture is machine cut and called a through dovetail joint as it is visible from all sides.
Hand-cut half-blind dovetail joint
Machine cut – through dovetail joint
I cut this joint by hand on some occasions and other using a router and template. The link below to the wiki gives more info on this joint and shows just how reliable this joint is!!
Here are some pictures of my work thus far. For more photos please see the post below this one. It contains a link to my Flickr photos. Read more
I am still building up this wordpress blog, in the mean time you can view picture of my woodwork projects on Flickr. Please follow the link below.
Hello and welcome to my woodworking website. I am a hobby woorworker based in Melbourne, however if you wish to have a piece of furniture designed and hand-made from great Australian timbers, please do not hesitate to contact me on firstname.lastname@example.org or via this blog. I use traditional joinery techiniques such as mortise and tenon and dovetail joints in constructing my furniture and use natural finishes where possible. Enjoy the site.